產品特點:
1.機架采用有限元分析設計，鋼板整體焊接結構，有很好的剛性和穩定性。
2.機架采用大型數控鏜銑床整體加工，保證剪切精度和質量。
3.刀架采用滾動導輪支撐，消除剪切間隙，提高剪切精度。
4.采用四刃剪刀，大大提高剪刀使用壽命。
5.刃口間隙手輪調節，刻度盤顯示，調整簡單、直觀、準確。
6.剪切行程可無級調節，以提高剪切效率。
7.采用串聯式油缸同步系統，蓄能缸回程，工作平穩可靠。
8.標配ESTUN21S剪板機專用數控系統，精度高，簡單易用。
9.后擋料采用滾珠絲桿、直線導軌結構，伺服電機驅動，定位準確、可靠。
10.前托料桿設有前定位刻度尺，機械擋塊定位，適應用戶不同的操作要求。
11.設有集中潤滑泵，操作簡單，保證關鍵部位的潤滑。
12.可選配氣動后托料和前自動送料臺。
技術參數：

QC11Y Series Hydraulic guillotine beam shearing machine
Specification	Shearing thickness (mm)	Shearing width （mm）	Strokes mm-1	Backguage range (mm)	Shearing angler (°)	Workbench height （mm）	Main power （kw）
QC11Y/K -6*2500	6	2500	10-35	20-600	1°30′	800	7.5
QC11Y/K -6*3200	6	3200	8-35	20-600	1°30′	800	7.5
QC11Y/K -6*4000	6	4000	7-35	20-600	1°30′	800	7.5
QC11Y/K -6*5000	6	5000	6-25	20-800	1°30′	900	11
QC11Y/K -6*6000	6	6000	5-25	20-800	1°30′	1000	11
QC11Y/K -8*2500	8	2500	10-35	20-600	1°30′	800	7.5
QC11Y/K -8*3200	8	3200	8-35	20-600	1°30′	900	7.5
QC11Y/K -8*4000	8	4000	7-35	20-600	1°30′	1000	15
QC11Y/K -8*5000	8	5000	6-25	20-800	0.5-2°	1050	15
QC11Y/K -8*6000	8	6000	5-25	20-800	0.5-2°	840	15
QC11Y/K -12*2500	12	2500	10-35	20-800	0.5-2.5°	900	15
QC11Y/K -12*3200	12	3200	6-20	20-800	0.5-2.5°	940	15
QC11Y/K -12*4000	12	4000	6-20	20-800	0.5-2.5°	1000	15
QC11Y/K -12*5000	12	5000	5-15	20-800	0.5-2.5°	1060	30
QC11Y/K -12*6000	12	6000	6-15	20-800	0.5-2.5°	840	18.5
QC11Y/K -16*3200	16	3200	7-30	20-800	2°30′	900	30
QC11Y/K -16*4000	16	4000	6-30	20-800	2°30′	950	30
QC11Y/K -16*5000	16	5000	6-15	20-800	2°30′	1100	30
QC11Y/K -16*6000	16	6000	5-15	20-800	0.5-2.5°	1100	37
QC11Y/K -20*2500	20	2500	9-30	20-1000	0.5-2.5°	900	30
QC11Y/K -20*3200	20	3200	7-30	20-1000	0.5-3°	950	30
QC11Y/K -20*4000	20	4000	6-30	20-1000	0.5-3°	1100	30
QC11Y/K -20*5000	20	5000	5-30	20-1000	0.5-3°	1100	37
QC11Y/K -20*6000	20	6000	5-15	20-1000	3°	1200	45
QC11Y/K -25*2500	25	2500	5-25	20-1000	3°	900	37
QC11Y/K -25*3200	25	3200	4-25	20-1000	0.5-3.5°	950	37
QC11Y/K -25*4000	25	4000	3-20	20-1000	0.5-3.5°	1100	37
QC11Y/K -32*2500	32	2500	4-12	20-1000	0.5-3.5°	1000	55
QC11Y/K -32*3200	32	3200	4-12	20-1000	0.5-3.5°	1100	55
QC11Y/K -40*2500	40	2500	3-10	20-1000	0.5-3.5°	1200	60
QC11Y/K -40*3200	40	3200	3-10	20-1000	0.5-4°	1200	60
Because in the continuous improvement of products, if there is difference between this date and technical data, should comply with the technical agreement parameters on both sides. No further notice!